Logo Page
CORPORATE SYMBOL / LOGO
The cross which appears as the half title in A New Zealand Prayer Book / He
Karakia Mihinare o Aotearoa is an official corporate symbol of the Anglican
Church in Aotearoa, New Zealand and Polynesia.
THE DESIGN
Designed by artist Ross Hemera, the stylised cross is of fluid design with
Maori motifs; this is set against a background of which reflects traditional
flax weave patterning of the peoples of Polynesia. It symbolises a church of
three tikanga or cultural streams.
CHURCH TITLE
"The Anglican Church in Aotearoa, New Zealand and Polynesia, Te Hahi
Mihinare ki Aotearoa, ki Nui Tireni, ki Nga Moutere o Te Moana Nui a Kiwa"
is the official name and title of the Church; the combined elements of the title
and corporate symbol create an official mark of the Church.
AUTHORISED USE
As an official symbol of the whole Church, the logo may only be used to
denote membership, association or identification with the body corporate of
three tikanga. While size may be varied according to use, the logo must be
used in the form of the authorised design options without addition or
alteration.
Permission to use the logo is not required for
(a) reproduction for print purposes for short term or "local use"
(e.g. service orders, notices, bulletins, magazines etc).
(b) use of prepared signage supplied under the authority of the General Synod
Office (e.g. internal signage, street notice board signage etc).
Permission to use the logo is required for
(c) reproduction for print purposes of a permanent nature or for extended use
(e.g. stationery, labels, handbooks, published resources for worship, education
or training, hardcover printing, books, calendars etc).
(d) application on fabric (e.g. church furnishings, vestments, banners, flags
etc).
(e) application on leather, synthetic materials, wood, glass, metal or stone
(f) specific design requirements apply to (d), (e) and (f).
Application for permission to use the logo should be made in writing to:
The
General Secretary, PO Box 885, Hastings.
COLOUR LOGO
The logo should be used as a two colour logo unless you are printing in a
single colour. Logos are available in process colour (i.e. full colour); spot
colour (i.e. Pantone colour); single colour (black).
- When using process colour the red is made up of 100% magenta and 100%
yellow; black is 100% black.
- When using spot colour the red is Pantone 032 and black is Pantone black.
- A printed single colour A3 logo sheet for clip art use is available from
church administration offices.
Black and White TIFF Files
Use these files for colour printing or for printing from laser printers etc.
Larger file for printing logos with a height from 25mm to 65mm - Download
Smaller file for printing logos with a height up to 25mm - Download
RGB TIFF File
Use this file for small, colour jobs. eg. printing from a colour inkjet. - Download
CMYK Colour TIFF Files
Use these files for process colour printing.
Larger file for printing logos with a height from 25mm to 65mm - Download
Smaller file for printing logos with a height upto 25mm - Download
Spot Colour Files
These Spot colour are in the DCS 2.0 format and are suitable for use in
Pantone colour jobs.
If you don't know what DCS 2.0 is you probably don't want these files.
Larger file for printing logos with a height from 25mm to 65mm - Download
Smaller file for printing logos with a height upto 25mm - Download
Jpeg Black and White / Colour Files
Black - Download
Colour - Download
| 
SITE TOOLS
